The Basics of Foundation Drilling Equipment: A Comprehensive Guide

Drilling rigs, the mighty machines that bore into the earth’s crust, are engineering marvels. Yet, as intimidating as they appear, their effectiveness hinges on each individual component working as it should. Each element plays a pivotal role in foundation drilling. 

Today’s blog is all about foundation drilling equipment. We’re covering the different types of equipment you’ll use on the job and the key components of the drilling rig. 

Keep learning to learn more! 

DIFFERENT TYPES OF FOUNDATION DRILLING EQUIPMENT

There are different types of foundation drilling, each with its own equipment to perform the work. The three basic drilling techniques are Kelly Bar Drilling Rigs, CFA and Displacement Drilling Rigs, and Micro-Pile Drilling Rigs. Let’s take a closer look at each kind. 

Kelly Bar Drills

The kelly bar is an integral component of many drilling rigs. It’s primarily used in foundation construction. The kelly bar transfers the rotary motion and the downward force from the drilling rig to the drill string or tool. Drill tools come in various configurations for specific purposes.

Structurally, a kelly bar has several sections that telescope into each other, enabling drills to reach varying depths. These sections might be square or round and include locking or friction to allow the application of downward forces.

As the rotary drive of a rig rotates, it directly imparts this motion to the kelly bar, which then rotates the drilling tool. This mechanism allows for the progressive extension of the kelly bar’s sections and, consequently, deeper drilling.

Applications

Kelly bars are primarily used for bored pile construction or drilled shafts. These deep foundation elements use specialized tools for the purpose at hand. The Kelly bar rig excels in creating large-diameter piles, even under challenging ground conditions. 

Tools attached to the Kelly bar engage the formations and extract the spoils. These tools include rock augers, core barrels, drilling buckets, etc.

In addition to bored piles, Kelly bar drills are often fitted with various kits to accomplish CFA and displacement piles. They are an excellent tool for foundational work for urban constructions. Think tall buildings and bridges, especially when there are complex soil conditions. 

Advantages

The inherent advantages of kelly bar drills are how well they adapt to diverse soil types, how deep they go into the soil, and how precise they are at drilling. 

CONTINUOUS FLIGHT AUGER (CFA) AND DISPLACEMENT PILE RIGS

CFA rigs have revolutionized the world of cast-in-place foundation applications. Central to this system is the auger, with its spiral, helical flight design. As this continuous spiral blade revolves, it carries soil upwards and outward, making way for foundational elements. 

Unique Features

Once the desired depth is achieved, the unique feature of the CFA comes into play. Concrete is pumped directly through the auger’s empty stem, filling the void. As the auger is gradually removed, the space remains packed with concrete, ensuring stability and minimizing the chance of collapse. After the concreting phase, rigid elements like steel cages and/or bars can be installed in the wet concrete. 

This method is best used to create deep foundation piles, which are especially beneficial for in-situ casting. This eliminates the need for separate excavation and pile insertion. Urban environments often favor CFA rigs for their discreet operation since they are quieter and don’t vibrate as much as other types of equipment. 

CFAs also stand out as a stable, efficient choice for terrains with water-bearing soils where traditional drilling might not work. CFAs are instrumental in putting up retaining walls — especially bordering or secant pile walls —- used extensively in excavation projects.

One of the standout virtues of CFA rigs is the sheer speed they bring to the table. They don’t displace a lot of soil, and the simultaneous excavation and concreting processes quicken the foundational process. 

Displacement piles resemble CFAs. The difference is that there is very little soil removed. The tool string is designed to compact the soil and not remove it. The soil is compacted outward, and the concreting phase fills the hole. 

MICROPILE, ANCHOR, AND TIEBACK (MAT) DRILLING RIGS

Micropile, Anchor, and Tieback drilling rigs are sophisticated pieces of machinery specifically designed to install the selected technology. At center stage is the rotation of a drill bit, down-the-hole hammer, or augers, which can penetrate various types of soil and rock formations when combined with a downward force.

Key Components

A typical MAT drilling rig consists of several vital parts. The tall mast supports and 

enables essential elements like the drill string and top drive. The drill string, which includes the drill pipe and bit, extends into the borehole and rotates to facilitate drilling.

A significant aspect of many MAT drilling operations is the circulation or mud system. This system circulates a special fluid, called drilling mud, through the drill pipe. This mud serves multiple purposes: cooling the bit, stabilizing the borehole walls, and evacuating cuttings from the hole.

Applications

You can use MAT drilling rigs for multiple projects. Micropiles, anchors, and tiebacks help to stabilize structures like shoring walls and various structures. 

Micro Pile Drilling

Micro piling is a deep foundation technique used to construct small-diameter piles. It’s a versatile solution that provides structural support and increases the load-bearing capacity of existing foundations, particularly in areas with limited access or where it isn’t feasible to use larger traditional piling equipment.

How It Works

Micropiles are usually made up of either durable steel casing and reinforcing bars or strands and filled with high-strength grout. The installation process involves drilling with or without casing. Then, the drilling elements are withdrawn, reinforcement is inserted, and grout is pumped into the hole.

What It’s Used For

Micropiling is used for underpinning areas with limited access, soil stabilization, seismic retrofitting, and temporary structures. 

DOWN-THE-HOLE (DTH) HAMMERS AND DRILLS

DTH hammers are powered and positioned right behind the drill bit at the base of the borehole. These hammers use compressed air sent through the drill pipe. When the air flows into the DTH hammer, an internal part moves back and forth quickly. This movement hits the drill bit hard, causing it to drill with a pounding action.

In essence, the rock is fractured by the rotational action of the spinning bit and by the hammer’s powerful impacts. An added advantage of compressed air is its role in debris removal. The air expels rock fragments from the borehole as the ground shatters, ensuring the drill bit remains unobstructed and cooled. 

Applications

DTH systems work well in multiple environments. They’re especially adept at deep-hole drilling and rocky terrains. While top hammer systems lose energy over time, DTH hammers keep working well no matter how deep you go. 

DTH drills are efficient and precise, making them indispensable across diverse drilling endeavors.

KEY COMPONENTS OF A DRILLING RIG

Drill Bits

Drill bits are the cutting tools of a drilling rig, designed specifically to penetrate the ground and break apart materials to create a borehole. Drill bits are made of durable materials like tungsten carbide or diamond and come in various shapes and sizes tailored to the specific ground condition they’ll be used in. 

The design details — whether they have teeth, blades, or buttons — are often fine-tuned based on the hardness and consistency of the rock or soil they need to penetrate. Even the most powerful drilling rig would be ineffective without the right drill bit.

Drill Rods

Drill rods, often called “rods” or “drill pipes,” are the long, circular sections connecting the drill bit to the drilling machine. They are made of high-strength steel or other durable materials. They’re responsible for transmitting the necessary force and rotation from the drilling rig to the drill bit. 

Drill rods also transport drilling fluids or compressed air to the drill bit, helping with cooling, lubrication, and debris removal. As the drilling progresses and the borehole deepens, more rods are added, ensuring the drill bit continues its downward journey.

POWER SOURCE AND HYDRAULIC SYSTEMS

The power source and hydraulic systems serve as a drilling rig’s heart and circulatory system. The power source, which can be an internal combustion engine or an electric motor, provides the necessary energy for the rig’s operation. 

This energy is then distributed through the hydraulic system, converting it into mechanical actions that drive the rig’s various components. Hydraulic systems enable precise drilling speed and force control with their pumps and valves. They also manage other rig functions, like positioning or stabilizing, ensuring seamless and efficient drilling operations.

MAST AND FEED SYSTEM

The mast, often called the derrick, is the tall framework or tower that supports and guides the entire drilling assembly. It provides the necessary height for stacking drill rods as drilling progresses. The feed system is attached to the mast — a mechanism that controls the drill rods’ and drill bit’s downward and upward movement.

The feed system ensures the right amount of pressure is applied to the drill bit and that the rods are fed into or removed from the borehole at the correct rate. Together, the mast and feed system provide the structural integrity and precise control needed for successful drilling.

WESTERN EQUIPMENT SOLUTIONS IS YOUR FOUNDATION DRILLING PARTNER

Precision, reliability, and expertise make all the difference when it comes to foundation drilling. Western Equipment Solutions stands ready to be your trusted partner in this endeavor. 

With a comprehensive range of top-tier drilling equipment and a team passionate about ensuring your project’s success, we’re more than just a provider — we’re your drilling companion. 

Don’t leave your drilling needs to chance; ensure you have the best equipment and support. Contact Western Equipment Solutions today, and let’s lay the groundwork for your project’s success together.